EMod Autocrosser

Sell your Roadster (or racing) related items here.

Moderator: Chris Coker

Post Reply
NomadTrash
Posts: 187
Joined: Fri Mar 07, 2003 9:11 am
Location: Krum , TX

EMod Autocrosser

Post by NomadTrash »

It's a sad day. I've decided to sell the race car.
http://rides.webshots.com/album/267887557HfboLz
I'll post up some specifications later. Currently it is running high compression motor on E85 fuel without the supercharger. It still has enough power to fry the 15" rear slicks.

$3500
[/url]
Andy Cost

1968 Datsun Roadster "Bucephalus"
E-Mod 68

Bolt on modification? I used some bolts.

[img]http://i28.photobucket.com/albums/c238/nomadtrash/P1011487trimresize-1.jpg[/img]
NomadTrash
Posts: 187
Joined: Fri Mar 07, 2003 9:11 am
Location: Krum , TX

Post by NomadTrash »

1968 Datsun Roadster

SRL311-02201
Set up for E-Modified Autocross Class
1700 pounds
JAPCO F/R fenders and hood

Front Suspension
Stock upper A-Arm
Modified Lower A-Arm
Adjustable Carrera shocks
1000 pound Hypercoil springs
Volvo lower ball joints
Relocated outer tie rod attachment
Outer tie rod replaced with heim joint
Relocated lower a-arm frame mount
1-1/8" custom adjustable swaybar

Rear Suspension
Adjustable three link
Panhard bar
Showa Coil overs
110 pound springs
3/4" adjustable swaybar
84 RX7 GSL rear end
Housing narrowed
Moser cut and resplined axles
Shimmed posi 150 lb+ breakaway

280z master cylinder
Front brakes
Outlaw 2000 4 piston calipers
Carbotech Panther Plus pads
Stock rotors
Custom brake caliper hangers

Rear brakes
Stock RX7 disc with adjustable proportioning valve

Wheels Tires
Real Racing Wheels
Front 15x10 Wide 5
Aluminum wide 5 adaptor to stock roadster pattern
Hoosier 22.5x9.5x15 R25a
Rear 15x14 Wide 5
Aluminum wide 5 adaptor to stock RX7 pattern
Hoosier 23.5x11x15 R25a

3 spare 22.5x9.5x15 R25a
4 spare 23.5x11x15 R25a
4 spare 23.5x12x5 R25b Radials

1991 KA24DE
Fuel injected
680cc injectors
11:1 compression pistons
1994 head surfaced, new valves, new seals
Block surfaced
MLS headgasket
ARP head studs
New rod bearings
Q45 MAF
Bikirom programmable injection computer
Runs on E85
Easy to swap to pump gas or race gas
Adjustable cam gears
248/248 cams
Stainless header 4:1
Billet lightweight flywheel
5 speed
Aluminum radiator
Oil cooler
Relocated oil filter (in headlight area)
2 K&N filters

Spare parts
1991 KA24DE block
Fresh from machine shop
Surfaced
Bored .5mm over
New pistons 9.2 compression
2 sets of rods
2 1991 heads
MLS headgasket .5 overbore
4-5 various cams 232/240/248
Lysholm/IHI 1200 cc twin screw supercharger
Intercooler
AC compressor
PS pump
Desmogged intake manifold
Cut stock intake for ITB
GSXR ITB with injectors and TPS
Spare Bikirom megaboard V2
Andy Cost

1968 Datsun Roadster "Bucephalus"
E-Mod 68

Bolt on modification? I used some bolts.

[img]http://i28.photobucket.com/albums/c238/nomadtrash/P1011487trimresize-1.jpg[/img]
NomadTrash
Posts: 187
Joined: Fri Mar 07, 2003 9:11 am
Location: Krum , TX

Post by NomadTrash »

Still for sale.
Andy Cost

1968 Datsun Roadster "Bucephalus"
E-Mod 68

Bolt on modification? I used some bolts.

[img]http://i28.photobucket.com/albums/c238/nomadtrash/P1011487trimresize-1.jpg[/img]
Post Reply