1600 short blocks

Sidney Raper · Post by **Sidney Raper** » Thu Mar 13, 2008 10:52 pm

Does anyone need a couple of 1600 short blocks?

Bill Wessel · Post by **Bill Wessel** » Fri Mar 14, 2008 4:18 pm

Sidney, you could not have posted this at a better time!

Yes, I need one bare 5 main block, desperately. If you could strip it, strap it to a pallet and ship it to WI, I'd be grateful.

By bare, I mean no crank, cam, pistons or covers. Just the block and main caps...thats it.

I just took one down to be bored for the engine I was going to build for Steve Jacobson and found a crack in the deck. So that one was junk!

Thanks a ton,

Bill

jake7140 · Post by **jake7140** » Sat Mar 15, 2008 12:20 am

Bill Wessel wrote: I just took one down to be bored for the engine I was going to build for Steve Jacobson and found a crack in the deck. So that one was junk!

Thanks a ton,

Bill

Thanks for the offer Sidney, and thanks for jumpin on it Bill. Bummer on the crack!

Retainers have arrived!