Datsun Roadster Racing

Hi Chris,

I tried to send an email to you but I have an 8 year old address.

You have some items on ebay that I am making an offer - sorta low

R-16 cam $100
springs $70 Eibach
head gaskets all 5 $100

Please let me know,
Stan
az589@lafn.org
310 320-4554

[attachment=0]MVC1-1016S (6).JPG[/attachment]U-20 Adjustable Cam sprocket with finite predetermined repeatable settings This kit is built around a new US made cam sprocket that is made from alloy steel and heat treated to the proper hardness for wear resistance. This kit is installed without any cam...

12A is way too small for a 280Z. A good rotary would be a 3 rotor that was a JDM engine. I saw one installed in a 67.5 roadster.

Stan
////////

Chris,

Sorry to hear that the host is going out of business. I vote to search out another host if possible. I would make a donation.

Thanks,
Stan
//////

SOLD

A NOS set of unused forged racing pistons with fitted Chrome-moly pins and snap rings.

These pistons are in great shape and show no shelf wear. The pistons are for 88.2 mm bore.

Price is $585 for the set Cheaper than stock pistons.

Stan
http://www.fairladyproducts.com

This item has been sold. Stan ======= This is a brand new matched ring and pinion gear with a 4.625 ratio. The ring gear has 37 teeth and the pinion has 8 teeth. It uses metric bolts for the ring gear. The carrier for the ring gear can have the holes opened up from 3/8" to 10 mm. As best I can tell ...

The correct ones were made by Schneider Racing Cams and they had them during the 90's. They supplied springs and retainers. I called them recently and they discontinued them because they were only selling a couple of sets a year so I asked if they had a drawing and they said no and that the place th...

New competition aluminum flywheel with replaceable steel insert and new ring gear.

No longer available from Nissan and rare in the aftermarket.

Price is $720.

Email az589@lafn.org

Stan

The cylinder block is a 3-main type. Sorry for the missing information. Stan New never used R-16 cylinder block suitable for a 1600 Roadster or an RL-411 sedan. Comes with new domed pistons with pins and rings in a box. Price is $385 and that is lower than others ask for pistons only. I may have a c...

Just received custom roller rocker shaft assembly for our pushrod engines. The rocker arms are made from high strength aluminum alloy and are anodized red. The rocker shaft is hard chromed. They also have custom adjusting screws and nuts. The price is $495 There are a number of these assemblies in s...

I have an H190 4.375 differential from a PL521 pickup for sale. It turns smoothly and the gears look very good. It has an aluminum carrier housing and is completely assembled. I got it from a truck in a junkyard and planned to use it but plans have changed. This will fit in a roadster if the spider ...

I have a brand new, never used, 3-main cylinder block for sale. I have been storing it in my garage for more than 25 years and have decided that I will probably never use it. The block came with cosmoline in the bores and was never assembled. This block could make a good start for a race engine or c...

That link that Sid posted is what I remember seeing in an old comp catalog. A few comments: The carbs, 16010-25505, are Mikuni type 3 made for Nissan and used on U-20 applications. The center pull linkage is Mikuni as used for the U-20 and not Weber. I have seen a factory 1600 manifold with this set...

Bill, I think that it was a 1979 catalog that I saw that listed the Mikuni setup for 1600's. I think that I have a copy but I have no idea where it is. If I run across it I will let you know. Somewhere I have a solex heat shield for the 1600 but I think that it was made for right hand drive only. It...

Hi Bill and others, This is my first post to the forum. I have seen several of the Nissan manifolds and one or two of the Cannon ones sold by Pierce and JAM so a few comments may be in order. Nissan sold the manifolds for 40mm, 44mm and 50mm Mikuni carbs. The manifolds were well made and the 44mm si...